June 12, 2017

Lens review: Angelic Eye Princess Blue

Yo!

I'm back with the circle lens reviews and today's pair that I'll show you guys is the Angelic Eye Princess Blue! The Angelic Eye brand is perhaps exclusive to HoneyColor so yeah, just thought I'd mention it in case someone wants to try these as well and no, this is not a sponsored review.

Let's get reviewing ~



Base curve: 8.6 mm
Diameter: 14.5 mm
Water content: 45%
Life span: 1 year (I recommend 6 months)


I don't have so much to say about the lenses themselves I mean, the design is sort of generic (aka I've seen similar circle lenses before) and it looks like it's trying to mimic a real iris, except in a more semi-realistic way. It's not a bad design in any way and because of its simplicity I can imagine that these would be good even for more casual outfits, classic lolita and the like. It's an ideal lens if you want pretty eyes but don't want them to be so obviously fake-looking that you'll scare away that nice grandma next to you.

These lenses definitely appear big if you look at them in the vials but, once worn, then at least on my eyes they're not quite as huge as I was led to believe. x) The size boost is still there of course but it's not eating up my eyes yet, lol.

One lens in. Notice size difference.
When it comes to color I think that the blue shade is really pretty – it's a rich and surprisingly vibrant blue! When compared to the green and brown pairs from the same series I have to admit that the blue one is my favorite but, then again, natural eye color is a factor worth noting because it does greatly affect how different lens colors show up on different eyes. My natural eye color is a light blue-gray (gray-blue?), by the way
It's funny because always when I buy several pairs from the same series I always go for green first and then take blue and possibly another color as reserves but, once I get to wearing the lenses, it's often the green that is the disappointing one and the blue that impresses me, lol. So yeah, blue lenses is a pretty safe card if you have a similar eye color as I do. xD

Lens photos ahead!
All photos taken by me during a June afternoon with a semi-clear sky.
There's no color filters or such on the close-up photos and that's so that the colors would be as true to real life as possible.


Bathroom light.
Flash photo.
Facing a window in the corridor. (not sun side)
Yellow light in the staircase.
Indoors storage room. Natural light coming from the side.
Outdoors, being on the shadow side of the building.
Outdoors, back against sun.
Outdoors, facing sun.
Comfort is pretty average. Felt a bit scratchy and uncomfortable upon insertion but it went away after a minute once the lenses settled. I could always feel them in my eyes when I moved my gaze around but otherwise they're quite okay, except that I experienced a couple dry bouts and some sudden stinginess (which could just have been a wig fiber poking my eye). I wore these for 2,5 hours before I felt the first signs of dryness kicking in, which is a rather average time for me and my sensitive eyes lately. If you don't suffer from dry and/or sensitive eyes I don't think you'd have much problems wearing these for notably longer than I did.

Again, what brings these lenses down for me is the big pupil hole. It's so big that it foils the color impact of the lenses on my light eyes, especially when viewed from a distance. It looks like I have big fancy eyes but yeah, the color is not instantly noticeable because the watcher's attention will first go to the huge pupil hole that completely reveals my true eye color first. It's a bit of a bummer because the blue color in itself is incredibly beautiful. :/ I just wish that the blue of the lens reached further into the middle because then these would be so much more awesome. It's still a pretty lens but I do think that the Angelic Eye Princess series would show their best side on dark eyes.

Distance photo!


Interested in these same lenses but in other colors?
Check out my other reviews here: Brown, Green, Gray
 
Short summary:

Color: 7/10
Beautiful vivid and rich blue color! Shame it doesn't reach further into the center of the lens...
Design: 6/10
Nothing out of the ordinary but it does its intended job well.
Opacity: 7/10
Wherever the blue is printed the coverage is good. It's a tiny little bit transparent, occasionally making a slight halo effect visible.
Enlargement: 7/10
Big enough to work for dolly eye looks, if you're into that.
Comfort: 4/10
Average-ish. I feel them in my eyes when I move my gaze around and wearing time on dry/sensitive eyes is about 2,5 hours. I experienced occasional dry bouts.
Naturalness: 3/10
Too bright and too big to really pass but they're not completely doomed either, thanks to the semi-realistic design.

Thanks for reading! I hope you enjoyed this review! ^_^

June 8, 2017

MH4U Eldaora's Taus Hunting Horn cosplay prop [part 3]

Hello cosplay fans and monster hunters alike!

Here comes the third part of my Monster Hunter cosplay project. I'm building a Hunting Horn weapon prop from scratch as part of a big school project. I've been a major fan of the MonHun games for years and I thought that it would be high time that I made a costume to make my love for the games visible, haha. The Hunting Horn that I'm making is the Eldaora's Taus from Monster Hunter 4 Ultimate and, if you missed the previous parts of this project, you can find them here and here. ^_^

Note: this project is split into several parts because otherwise it would turn into a kilometer post; I need to document my progress carefully (many photos etc) since it's a school project. 

Let's get to crafting this thing!

Starting position. I know that the end knob
is crooked but it was unavoidable. I will
hopefully fix it later.
Okay, so I left off last time with my Hunting Horn looking like a sleeping foam mummy. I had run out of the two extra cans of PU-foam (aka expanding foam) that I fetched from Säästötex earlier and, meanwhile I was busy with school since I left, mom actually went and bought more of the sale cans for me. Once I got back to mom's on 4th June five cans of foam were waiting for me. The sale 5 cans for 10 € was still available, God bless. 
I continued applying expanding foam to the build, mainly the knob at the end of the shaft, the back of the "horse head" and the thickest part of the shaft's backside. I left it to dry for some hours and when I came back I noticed that the foam had hardened but it wasn't ready to be cut. I checked the knob and noticed that the foam had indeed fallen off and was partly stuck to the ground (thanks gravity) and so I separated it from the floor which thankfully I had covered in plastic before, for protection and decided to turn the prop so that it laid on its side, to allow for the "inside" of the knob to dry. You see, where the foam had fused with the ground it actually was all wet on the inside, and when I turned it I accidentally grabbed on that non-hardened spot and my fingers just sank into the sticky goo. Eww. Protip: if you ever get PU-foam residue on your hands (it sticks like a second skin and feels like really sticky glue that won't go away) you can get rid of it by applying nail polish remover onto a cotton pad and swiping the affected areas with it. It's important that the remover contains acetone.

The following day I returned to start shaping it. I started off with the back half of the mane and just cut it somewhat into its general shape. I noticed at some point that I'd need to to make each of the mane hairs (there would need to be 7 +1 on the back of the final product) deeper.

Started carving out the back mane.
While I was working I suddenly caught a sniff of that strong distinct smell of fresh PU-foam. I stopped in my tracks and checked where the smell was coming from – it didn't take many seconds before I noticed that some thick, yellowish and unhardened foam was bubbling up from the inside! It was all gooey and sticky and I used whatever scrap pieces I had at hand to wipe it off, but it just kept coming out slowly but steadily. I was just standing there like "oh come on..." because it had gotten about 24 hours to dry but it was still, seemingly, not enough.

Red arrow points to the fresh foam bubbling out.
(note: this was taken directly after I noticed it, it grew a lot more since then)
No can do but put the carving on hold until it has completely hardened. What a bummer, I don't have so much time to finish this project.
During the remainder of the day I went out a couple times to check on it and there had formed a pillar of foam! It was probably close to 10 cm in height and had this weird I've-kinda-hardened-on-the-surface-but-still-gooey-on-the-inside consistency like I could touch it without making a sticky mess but I was sure that my finger would crush the surface if I applied even a small amount of pressure, aka I could feel it give in under my fingers. I decided to rip off the protruding pillar of foam (using tools and not my own hands) to make sure that, if anything else would flow out later, it would be able to come freely.

The next day I checked the hole that the foam had been flowing out of; it had hardened and so I continued work. I continued to shape the "hair bananas" in the back, aka the back mane. :) As I've mentioned before I'm not even trying to make this thing 100% accurate to the game (which would be a pain in the butt because of all the symmetry) and so all the mane bulks are free-handed; I kinda wanted them to have a natural "flow" to them, if that makes sense. I did make sure that there were 7 of them though and I'll add the small pointy tip one later.

Mane carving in progress.
Once the back mane was somewhat in shape I decided to test out the papier-maché ears that I had made in school earlier – turned out indeed that they were a tad too big. :/ It's really hard to get the size right when you don't have the head there to compare with and have to go by memory and a note.
I quickly made some new ear bases out of chicken wire, slightly smaller.

Comparing old ear(s) to the head.
Comparing new ear(s) to the head.
I decided to skip the papier-maché approach on the new ears because I don't have the equipment for it and I think I might get better end results with the foam anyway, since the whole build is covered in expanding foam. I'll save the old ears for another project so they won't go to waste.

New and old ear side by side. For size comparison.
I didn't attach the ears yet and instead continued on carving out the shaft (handle, whatever you want to call it) of the Hunting Horn. I thought that this would be easier to do than the manes but lolnope. :') So yeah, I started carving as usual and then, at some point, I realized that those separating lines (showing where each of the three levels end) didn't meet! It was really annoying to notice it after I had already done a majority of the work. Even the slightest difference would add up and then when you had spun the thing around completely the separating lines, at worst, had more than a 10 cm difference. -_- It was impossible to keep track on if the line was straight or not because of the foam's bumpiness and the circular shape, aka I had to constantly rotate it to do any progress and thus couldn't get a good grip on if I was cutting it straight or not. I had to improvise a lot and it's not perfect nor symmetrical good thing it's not super noticeable because of the shape.

Started carving out the shape for the shaft.
I took the can of foam and filled in some uneven spots on the manes, on the shaft and wherever else there wasn't enough foam. Meanwhile it was drying I made the horns in the same way as I made the ears. They had to be 50 centimeters long each.

Horn bases done.
You might notice that the horn sketch is under and that the curve on it is different. I can say that I drew the reference image way too big for the paper (common mistake that I do, lol) and thus the proportions were off (I had to fit it in); I wasn't planning on doing strictly the same shape anyway, just drew it to get a general idea and as a reference for details, once I get to painting the horns.

I left the horns for later and left the Horn (hihi) for drying overnight. The following morning I continued carving – this time doing the rest of the shaft, except for the end knob. Now it's starting to look like something!

Shaft carved out and new foam added to uneven spots + end knob.
I can't help but think that it looks like an oversized fancy chess piece. It's quite noticeable that it's not exactly like in the games and yeah, I had to make it different for a number of reasons and hey, taking some artistic liberties every now and then is fine~! The main difference is the shape of the upper neck (where the head attaches to the shaft) and thus the head's position, as well as the position and shape of the manes. It just ended up differently and I don't even mind – I made it my own and it will still be easily recognizable. It's like, maybe 85% accurate, haha.
I have used so much money on this that I don't want to butcher half of my hard work just to correct some proportions and/or placements. I can't change the shape of the head/neck part anyway (which is the only thing that slightly even bothers me) because it's a placement miss that happened so early on, aka already at the cardboard base. Because of that, and how I started with the front mane hairs, the head is pretty much doomed to be almost stuck to the neck instead of being more up and free like in the game. No can do and no big deal – it will be awesome anyway! 

Before I left it for the day I added some foam to even out the end knob and to patch up some small spots on the shaft that were uneven. The following morning I went out to carve the end knob and oh boy, it was a pain in the ass! I was thinking all along that "it can't be so hard" but I swear this was the most frustrating part of the project by far.
I quickly gave up on trying to get the knob to be identical on all angles because it was flat out impossible! Every time it looked good, when viewed from a particular angle, I would spin it around and then the opposing side looked like a case of "end my misery". The more I tried to correct one side the more it messed up when viewed from a different angle... or when compared with another side; it basically needed to have the exact same angles on all four sides to be perfect. It just wouldn't line up nicely no matter what I did and I ended up losing my patience, which is rare. Yeah, I was at the verge of ragequitting.

Fuck this shit, let's call it close enough. 8C
So yeah, the knob is far from symmetrical and it's obviously tilting more towards one side than to the other but oh well, I did what I could. It's not bad enough to be a complete eyesore but it does trigger my perfectionist side a bit, lol. It could be worse though at least that's a consolation!

That's all for this part and next time I'll get to start on the surface treatment! Be sure to follow my blog if you don't want to miss it. ;)

June 4, 2017

MH4U Eldaora's Taus Hunting Horn cosplay prop [part 2]

Hello hunters and cosplay fans!

If you've been following my blog or social media accounts you know that I'm currently working on a big and challenging project, namely my first Monster Hunter cosplay prop! I've been a huge fan of the games for years now and as part of a big school project I'm now making the Eldaora's Taus (aka Rusted Kushala Daora one) Hunting Horn from Monster Hunter 4 Ultimate. I will eventually make a full MonHun armor as well, to go with this Hunting Horn, but for now I'm focusing on making the weapon prop first!

And, in case you missed it, I highly recommend that you take a look at part 1 of this cosplay build to know what I did before this post! ;)

Note: this project is split into several parts because otherwise it would turn into a kilometer post; I need to document my progress carefully (many photos etc) since it's a school project. 

Let's get to the prop making!




Above are some additional reference photos of the Hunting Horn in question, seen from different angles. Enjoy my hunter in his undies! These have been my main references while I've been working on this project. I'm not aiming to make it perfectly identical to the in-game version (that would be really hard when it comes to symmetry) seeing how I'm making the whole thing by hand and with materials that I'm new to.

Continuing from where I left off I went to school's art classroom to work with chicken wire. This is a material that I've barely working with before and so my art teacher and supervisor for this project– showed me how to work with the chicken wire. At first it was a bit hard to get the net to do what I wanted but once you got the hang of it it was actually quite easy! Save for accidentally poking yourself with it – use gloves, people. I needed to fill some gaps on one of the ears with steel wire, which basically meant just "sewing" it closed.

Wire base for the ears.
I was supposed to make the ears about 10 cm long but I ended up making them almost the double, oops. When I made these I thought that 10 cm looked ridiculously small, to be honest. Now to hope that the ears aren't too big once I get to the part that I'll attach them to the head. Before starting putting papier-maché around the whole thing I wrapped it in masking tape, for extra sturdiness and to even out any bigger gaps.

Ears left to dry after first two layers.
I returned to the art classroom on several days to add papier-maché layers to the ears. The problem with papier-maché is that once the wet paper dries it sinks in a bit and, unless you have enough layers built up, the hollows left by the chicken wire's hexagonal (or whatever size you have) patterns will show through. I did over 5 layers to get it to be somewhat smooth.

Reference sketch for the horn's general shape.
I sketched some references for the horns but I didn't start building them on the same day. Instead on the weekend I went back to mom's to continue working on the main body of the Hunting Horn in the garage – which mainly meant adding a lot of PU-foam to the back and sides.
The thing is that I had to add PU-foam (aka expanding foam) in layers and move the head around every time I wanted to get to a different area because otherwise gravity would do its job and I'd waste foam. Learn from your mistakes.

Backside unfoamed.
Added some foam to the back.
I kept spraying on some foam, waited for it to expand and dry and then came back, turned the thing around, rinse and repeat. It's time-consuming but it's better than messing up and I'd rather be patient and not take risks.

Once both halves of the backside had gotten their fair amount of foam I started building the shaft. After having worked with the ears I figured that I could try my luck at using chicken wire for building the main body. I must admit that I hesitated but ultimately went with a yolo mindset. Half the time I was not sure what I was doing because yeah, it was a complete trial and error episode. Good thing Sacchan was with me and so she provided a pair of extra hands for holding things in place meanwhile I secured the nets to each other with steel wire etc – it's convenient to have friends around when you're working on large-scale builds.

Base for the main body done.
Same as above but from a different angle.
I'm actually surprised how well it turned out! It took some hours but it was worth the effort. It's satisfying to see things for once in a while turn out well, even though you went at it looking like a big question mark. I just hope that I'm gonna be disaster-safe until the end, lol.

Close-up of the front of the shaft.
Same as above but the backside.
Now the next part was to cover the whole thing with something and my first thought was to use expanding foam as well, but I wasn't sure if it would actually work. I was afraid that while the foam was fresh it would fall through the wire's structure but once I stared applying it onto the chicken wire it actually stayed on top – good! It seemed to stick just fine (then again, my stepdad said that it has some glue in the contents anyway, hence why it's a bitch to get off if you get it on your clothes etc) and I left it to dry for some hours. Once I came back the foam was still on, now expanded and hard.

Started spraying expanding foam on the wire parts.
Knowing that the foam method works I continued to apply PU-foam all over the build. I had to go out and buy some more cans because yeah, my spare can ran out before I knew it. Luck was on my side and Tamperen Säästötex in town had big cans of expanding foam for dirt cheap because the best before date had recently passed. I bought two cans (different brand than the one I used before) and happily went home to continue the project. For anyone interested the cans were 2,50 € each and you got 5 for 10 €!

Almost done foaming. It looks like a sleeping mummy horse... :'D
I'll need to add even more foam later, especially to the back of the head and to the little end knob, but I'll see what it looks (and weights) like once I start carving out the details.

I'll end the second part here and next time I'll continue adding foam to the back, carving the main body of the Hunting Horn, start making the horns and more! Stay tuned for part 3!

June 1, 2017

Lens review: Angelic Eye Princess Green

Hello folks!

I'm continuing with the circle lens reviews because yeah, I have quite a lot of lenses that expire in a near future so I really need to open and review some pairs before it's too late! Today I will be reviewing the Angelic Eye Princess Green, which, as far as I've seen, can only be bought at HoneyColor. Perhaps it is an exclusive brand to them, I don't know. ^^"

Let's get to the review, shall we?



Base curve: 8.6 mm
Diameter: 14.5 mm
Water content: 45%
Life span: 1 year (I recommend 6 months)


My first impression of these lenses was that they appear really big and kinda moe-like. I'm not really a big fan of super huge lenses, to be honest, but in some cases they look great; I bought these mainly because there's really few reviews of the Angelic Eye brand lenses out there and I want to help the community – I also bought these some years back when they were on sale, so why not? :)

I don't have so much to say about the design itself, it's rather basic and doesn't stand out much – except for the sheer size, of course. The yellow center is supposed to make the lenses blend better into your eyes but yeah, seeing how I'm a light-eyed individual the transition from lens to eye doesn't look as natural as it would look on someone with dark eyes, I suppose. It's funny because the brown lens from the same series actually blended better into my eyes, lol.

One lens in.
I was expecting these to be more covering in terms of color than they actually were. The color is a lil' bit translucent and not the shade of green that I was hoping for – a small disappointment. It's not a bad or ugly color by any means but I was crossing my fingers for that bright and cheery grass green type of shade and this is not it – it's more like a forest or emerald green, I dunno? It's still a pretty color but it seems like, at least for me, that as soon as someone watches me from a distance then the big pupil hole, showing much of my real eye color, is more noticable than the green of the lens itself (the green is only at the very edges) if that makes sense. Because yeah, a lot of your natural eye color will show through in the center and most times this doesn't look super-mega-good on light-eyed individuals; the reason it is like this is probably because circle lenses are mainly marketed for Asian women (dark eyes) and because dark brown is closer to black (pupil) the change between real iris and lens color doesn't "clash" as badly. Oh man, that explanation felt really clumsy and messy, I hope you understood what I tried to get to. ^^"

Regarding the enlargement effect I don't think that I need to say much I mean come on, these are obviously big! But I must admit that I thought they would look even bigger than they do on my eyes but nope, I didn't end up looking like a scary doll so it's all fine, haha! Of course the size increase will look different depending on your eye shape but yeah, generally I'd say that these will get you the dolly eye effect, if that's what you're looking for. 

Lens photos ahead!
All photos taken by me during an afternoon with a semi-clear sky.
All close-up photos are free from color filters etc and that's so that the colors would be as true to real life as possible.

Bathroom light.
Flash photo.
Facing window. (not sun side)
White light in the corridor.
Yellow light in the staircase.
Indoors storage room. Natural light (that the camera turned blue).
Outdoors, facing the sun while being in the shadow.
Outdoors, back against sun.
Outdoors, facing sun while it's hidden by thin clouds.
Outdoors, facing sun.
When it comes to comfort I can say that I have naturally really dry eyes and also somewhat sensitive so yeah, keep that in mind when I grade comfort on any pair of lenses. These lenses were comfortable almost as soon as I put them in, unlike their brown counterpart, and I could wear them for approximately 3 hours before I felt that the lenses were drying. At first I felt them slightly in my eyes (possibly because of the size) but my eyes got used to them in maybe half a minute or so and then I didn't really feel them anymore! I played video games for about 50 minutes with the lenses on and I had no problems – normally staring at a bright screen is uncomfortable with lenses on, or at least it makes the lenses dry faster.

Distance photos!



Interested in these same lenses but in other colors?
Check out my other reviews here: Brown, Blue, Gray
 
Short summary:

Color: 6/10
I was hoping for a vivid grass green but got a "typical circle lens green" instead, aka a forest/emerald green lens. It's still a pretty color but because of the big pupil hole a lot of the color's impact is lost. :|
Design: 6/10
Nothing fancy and eye-catching. A quite ordinary design that I've come to expect from circle lenses. It's not a bad thing in itself but it's just, err, basic.
Opacity: 6/10
Color coverage is decent wherever the green color is printed. My real iris does shine through and create a halo effect in some lights.
Enlargement: 7/10
Definitely big and good for dolly eye looks. Not as huge as I thought they would be on my eyes.
Comfort: 6/10
Overall comfortable. I don't really feel them in my eyes and can wear these for around 3 hours before they start to feel dry.
Naturalness: 3/10
The shade of green is not exactly natural and neither is the size, but the design does remind you of a real iris... *shrugs*

Thanks for reading! I hope you found this review useful. ^.^