Showing posts with label gloves. Show all posts
Showing posts with label gloves. Show all posts

February 8, 2014

Masamune's gloves + arm guard test!

 Hello hello!

On 7th February I decided to paint Masamune's gloves and thus get some more progress done on the costume. The gloves I got for free by the awesome Kandi & Cyber some time ago (thanks <3) and now they got a cosplay make-over!

Glove before my treatment
Okay, so what do? Well, first thing was to check how the paint would behave on the fabric. I obviously don't have any scrap piece of the same fabric so I was stuck with doing a paint test on the glove itself. Of course I did this on the inside just to be on the safe side.

Paint test
It seemed to take the paint really well (and it didn't leak to the other side even though the gloves are not the thickest) so I felt sure enough to start painting. But of course before I could start painting I dug up a bunch of Masamune Date references that I had saved on my computer.

Ta-dah! Better.
Because I'm left-handed I figured I would paint the right glove first and wear it while painting. Turned out to be a good idea because I could get a better idea of how it would end up looking and I could turn my hand when needed and so on.

Started painting..
... and painted some more...
... and wham! One glove done.
I did a few layers of paint because it faded slightly every time it dried, not bad at all though.
When I had the right glove done I realized I was up for a dilemma - I can't paint my left glove by using my right hand! D'oh!
Well, I needed to find a right-handed victim helper who would be willing to act as my hand stand while I did the painting - Hasakitsuki was up for the task. So for 1 hour she ended up with only one hand to use meanwhile I painted the glove on the other. I must admit it was a bit harder to paint the glove on someone else's hand but oh well, ultimately it still turned out okay.
With both gloves painted I had to wait 6 hours before going to iron and thus set the paint, according to the instructions on the paint that is. I decided it's better to obey the instructions every once in a while so I let 6 hours pass.
A few hours from midnight I thought it would be okay to go and set the paint. I walked to the laundry room, put the iron to heat and started turning my gloves outside in.

And this is what they looked like when turned. Sexy.
I waited a bit for the iron to heat and did a quick try on one glove and well, it was barely hot at all. I waited some more and put slightly higher heat and then tried again and... it felt like something glued itself to the iron and didn't want to let go! Luckily I had quick reflexes so I pulled the iron away out of instinct that something wasn't right and well, when I looked at the glove I saw this...

PERKELE!!  (╯°□°)╯︵ ┻━┻
The fabric literally melted away; the edges next to the holes are a bit harder. Note to self: don't iron stuff if you aren't 100% sure of what fabric it is. Thank God I didn't melt any part with the paintings on or a showing part for that matter! I'm a bit relieved because I avoided a disaster seeing how the damaged part is far down and would likely get covered by the arm guards anyway. But I'm still going to try and repair it by sewing some fabric to it.. now to just hope that mom remembers to bring me a piece of black fabric tomorrow. Yes, I cosplay emergency called her.

Okay, so 8th February dawned and mom appeared with the fabric. I ended up with the whole roll because she couldn't be bothered to cut out a piece for me. Ah, the joys of having a mom who used to have her own fabric store - you borrow whole fabric rolls for your projects. xD

le savior fabric
I must say this fabric is an okay candidate, it's not exactly the same obviously but I would say it's close enough; it's black, feels similar, about the same thickness as the glove fabric and has slight stretch. 
I just did some quick measuring and cut out what I needed...

... and this was it. So worth borrowing the whole roll.
Yeah. After that I quickly zigzaged around the piece (which proved out to be a bit hard because of the ridiculous size..) and then it was time to sew it on to the glove itself. I thought for a moment if I should sew it to the inside or outside but decided that it would maybe be better on the inside after all. I must say this was a pretty scary mission because even if I took off a part of the machine the sewing surface wasn't small enough so that I could pass the glove through and thus avoid the worry of accidentally sewing my glove shut. :'D This might have been easier to just hand-sew but I'm too lazy for that so I decided to rock the more hazard edition anyway.
So I put the glove next to the presser, adjusted it carefully so that I wouldn't have fabric underneath where I was about to sew and then I just slowly started sewing around the square with a straight stitch. It took a while and I was pretty nervous but it went well and at the end I had my glove feat. repair patch.

Sewing in progress
Inside of glove after reparation (yes, my fabric paint test is there..)
Outside of glove after reparation
Sure it's not the prettiest ever but at least there's not a gaping hole there showing my skin or anything. Also, this should prolong its life slightly. Hopefully.

So with the glove repaired I thought I would try the whole arm guard system on and see if I could even put on all the completed parts. I swear at some point I started feeling a bit unsure and thinking it might not work but BAM it sort of did after some struggling! But hands down I must say it was overly hard to put the guards on by myself.. I would need at least two or three arms lol. Valkoinen Octopus' Cosplay. But yeah, as I said I managed to put the guards on... or well, one of them.



This was a test try-on but I did realize that I will need something to hold the top ends bent over each other or its gonna explode in any random direction. If you look a bit closer on the pics you can see that my first solution for this was to use hairpins. xD It actually worked surprisingly well but I'm not sure if I would call it a discreet enough solution... unless I find black ones somewhere that are half the size of the ones I used. I'll have to think about this but I have a feeling that I might end up using hairpins anyway.

But that's it for now, smell you all later! ~

September 4, 2012

HHHHHHHHHHHHHANSKA

hanska = glove (in Finnish)

And it's done!

How I made it? Well, I took some pattern paper, spread out my hand on it and traced out an exaggerated mega-sized version of my hand. Yes, it looked ridiculous and I laughed until I cried.
Then I just cut the pattern out, put it on top of this.. err.. is it called PVC fabric or what in English? I dunno, it's not leather but it has a slightly similar feel, it is shiny and it doesn't fray.
Whatever, I cut out a front and a backside glove 'prototype'. 

Cut out
Cut finger spacings and just sewed the glove together, leaving the finger holes open for obvious reasons. Then I turned it right side out and tried it on.
I must say at first when I was trying to get it on it felt like I had made it too small.. but after some time and struggling I got it past the narrow part and then it... well...

If this is supposed to be a glove I'm a fucking whale shark.
Yeah, just like that.
So.. to get back on track. I cut the glove fingers shorter and then it looked like this:

Better... but still rather fugly. (note the 'bump' and retard looking thumb)
So I went and took it in a bit and reformed the thumb opening and placement slightly and then I had got something that I finally could call a 'glove'.. without feeling like I was trying to fool myself.

Not perfect, it's still a bit bunchy but it's decent enough ~
Remember that I mentioned earlier that this was a 'prototype'? Or well, supposed to be more like a try-out. Well, it turned out better than I had thought in the end so I didn't bother to make another. xD This one was fine after the modifications.

And this means that my Bakumatsu Renka Shinsengumi Saitou cosplay is now ready for debut at Tracon, AWWWWWWW YEEEEEEAAAAAA!!

This is probably going to be my last blog post before Tracon so, well, see you there!!